尚馬, soma-Pro-Ject The Classic Evo

Pro-Ject The Classic Evo

售價:72,500

選購:


Sub-chassis turntable with 9“ carbon/alu sandwich tonearm

 
The Classic meets the 175 VPO to melt design-ideas
 
The new Classic Evo is based on the successful EISA Award winner Pro-Ject The Classic. The main improvement is the sub-platter, where we used the experience we gained from designing the 175 – Vienna Philharmonic Recordplayer to add key changes to the Classic Evo. The main bearing construction we use is a similar system as the one on the Vienna Philharmonic Recordplayer. For improved comfort, an electronic speed change was built in, which lets you switch from 33 to 45 rpm (and vice versa) with the push of a button. Compared to the old Classic, we improved the subchassis; we tried to make it heavier and stiffer to reduce resonances. Isolating the platter and tonearm from the resonances of the motor and main plinth is the target. The heavy aluminium main platter construction utilises advanced thermo plastic elastomers (TPE) for optimising resonance behaviour.
 
 
The tonearm tube is made out of a sandwich of carbon and aluminium: carbon for stiffness and speed, alu for better damping. The bearing has been upgraded to the same type that is used on our Pro-Ject CC EVO tonearms. It facilitates frictionless vertical and horizontal movement, guaranteeing precise tracking across the entire duration of the record. The counterweight incorporates a TPE* damper which allows us to reduce the amplitude of the tonearm cartridge resonance frequency by 50%. As typical for Pro-Ject we offer also azimuth and VTA adjustment to use a variety of cartridges.
 
We supply as standard the Ortofon Quintet Red moving coil cartridge. However, as the tonearm offers excellent damping and flexibility as well, its effective mass can be called middle heavy, so it is also a very good partner for MC cartridges.
 
 
In the box:
● The Classic Evo with Ortofon Quintet Red
● Connect it E RCA Cable
● Dust cover
● Felt mat
● Adapter for 7“ singles
● Round drive belt for 78 r.p.m.
● Power supply, allen key, stylus pressure gauge
 

售後服務

*若您收到的商品有瑕疵或異常問題,請您於收到日算起的七日內與我們聯絡,我們將會立即為您辦理退換貨手續。
*本站上架販售之產品,因各廠牌顯示器及輸出色差關係,於螢幕所示產品圖與實物略有差異乃屬正常,購買時仍以
 實體規格、尺寸、色澤為準。
*依照中華民國消費者保護法規,從商品到貨日起七日內為商品的猶豫期,若您認為您收到的商品有任何的瑕疵或損
 壞,可要求退換貨,處理方式如下:
 商品瑕疵 - 請先告知本公司後,由客服人員聯繫安排處理退換貨事宜。此運費由本公司支出。
 無理由退貨 - 請先告知本公司後,由客服人員告知退貨流程及退貨寄回地址。此退貨運費由消費者自行支出。
*若客戶購物後欲更換商品,請於購物七日內保留原商品完整內外包裝及發票,否則恕不更換。欲更換之商品應以原
 先購買之機型為準;欲更換之商品及內外包裝若因人為因素所造成損壞及污損,恕不更換。
*若您要辦理退貨,請先與我們連絡,待商品收回後,進行確認商品是否確實屬瑕疵或損壞品,確認無誤後,我們將
 會立即辦理退款手續並將退款金額匯至您指定的銀行帳戶中,若您是採取線上刷卡的話,我們會將原刷卡金額辦理
 刷退。
*七日商品猶豫期不包含福利品之販售,且購買者不得以外觀瑕疵問題要求退換貨,請務必確認後再購買。

發票寄送

*發票將在付款完成、出貨後開立,並與商品一併包裝出貨。
*若三聯式發票需更改抬頭、統編,請註明正確抬頭、統編,於收到發票五日內,連同回郵及收到的發票掛號寄回
 「106台北市大安區忠孝東路四段15號10樓 客服部 收」(以郵戳為憑),以利為您換開發票。

Facebook
Twitter
Youtube
Instagram